Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

End-to-End BERT for CTP Bundles Overview

 

This topic provides an overview of how to set up end-to-end BERT for CTP bundles.

Figure 1 shows the normal data flow through the network. BERT is disabled.

Figure 1: Normal Data Flow
Normal Data Flow

To set up end-to-end BERTS for CTP bundles:

  1. To send BERT transmissions to the network, start BERT injection on each CTP bundle toward the IP network as shown in Figure 2.
    Figure 2: BERT Transmission to the Network
    BERT Transmission
to the Network
  2. To receive BERT reception from the network, start BERT reception on each bundle from the IP network as shown in Figure 3.
    Figure 3: End-to-End BERT Reception
    End-to-End BERT
Reception

The result is that end-to-end BERT transmission and reception are running as shown in Figure 4.

Figure 4: End-to-End BERT Transmission and Reception
End-to-End BERT
Transmission and Reception