Verifying Primary and Secondary AutoSwitch Connections for Bundles (CTPView)
You can test the connection between a CTP device running AutoSwitch and its primary and secondary circuits.
Before you begin:
Log in to the CTPView software at least at the Net_Admin level.
Connect the CTPView server to the CTP device on which you want to use this feature.
To test connections to primary and secondary circuits using CTPView:
- In the side pane, select System > Configuration.
- Click AutoSwitch.
- Under Connection Check, you
have the option of verifying all connections or verifying specific
To verify all connections, under Connection Check, click ALL.
To verify connections for a specific primary or secondary circuit, click Test under the Primary Host and Secondary Host columns.
During the test, the buttons turn blue and display Testing. The results of the test are displayed inside the buttons, and the background color around the buttons either turns green for success or red for failure.