Displaying BERT Status and Counters for CTP Bundles (CTPView)
This topic describes how to display BERT status and counters.
Before you begin:
Log in to the CTPView software at least at the Net_Admin level.
Connect the CTPView server to the CTP device for which you want to change the status of the bundles.
To view BERT status and counters:
- In the side pane, select Bundle > Diagnostics.
- Click Bit Error Rate Tester.
- Run your mouse over the MouseOver to Select
a Port to Display bar.
A list of bundles configured on the CTP device appears.
- In the table of bundles, select the bundle that you want
The BERT configuration and counters page appears. Table 64 describes the status and the counter fields.
Table 64: BERT Status and Counters in CTPView
Sync or Lost
Shows whether the local CTP device is currently in sync with the remote device.
Error Free %
Percentage of time since BERT statistics were cleared that there were no errors.
Number of errors found since BERT statistics were cleared.
Number of seconds during which there were errors.
Number of seconds that the local CTP device has been in sync with the remote CTP device.
Percentage of time since BERT statistics were cleared that the circuit has been available.
Number of seconds the current update has been running.
Number of times synchronization was lost.
Time since the BERT counters were cleared.