Configuring the Direction of the Circuit (CTPView)
This topic describes how to configure the direction of the circuit.
Before you begin:
Log in to the CTPView software at least at the Net_Admin level.
Connect the CTPView server to the CTP device for which you want to configure bundles.
To configure the direction of circuits created with the CTP bundle using CTPView:
- In the side pane, select Bundle > Configuration.
- Run your mouse over the Display and Select an Existing Bundle bar.
- In the table of bundles, select the bundle that you want to modify.
- Under Bundle Options, configure the parameters as described in Table 11 and click Click to Submit Bundle AND Port Changes.
Table 11: CTP Bundle Circuit Direction Setting in CTPView
Specifies whether the circuit is unidirectional or bidirectional. If unidirectional, specify the direction of the circuit—source or destination.