Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Displaying the Management and Circuit Interface Settings (CTP Menu)

    To display the configured network settings using the CTP Menu:

    1. From the CTP Main Menu, select 5) Node Operations.
    2. Select 2) Display network settings.
      Hostname: ctp_90
      
      Protocols supported:   IPV4 ONLY
      
      Segregation between management and circuit traffic: ON
      
      Default management device (eth0: 10/100/1000 Copper (right back)) IPV4 parameters:
              ipaddress:  1.1.1.1
              netmask:    255.255.255.0
              gw:              1.1.1.3
              mtu:        1500 bytes
      
      Default circuit device (eth1: 10/100/1000 Copper (left back)) IPV4 parameters:
              ipaddress:  10.216.118.90
              netmask:    255.255.254.0
              default gw: 10.216.119.254
              mtu:        1500 bytes
      

      Table 1 describes the fields corresponding to the configured network settings, including the status of the capability to segregate management and circuit traffic, displayed in the output.

    Table 1: CTP Network Settings Display in the CTP Menu

    Field Name

    Field Description

    Hostname

    Hostname of the CTP device.

    Protocols supported

    Displays the protocols supported on the CTP device, such as IPv4 or IPv6.

    Segregation between management and circuit traffic

    Displays whether the functionality to segregate management and circuit traffic is configured (ON) or not (OFF).

    Default management device (eth) IPV4 parameters

    ipaddress

    Displays the IP address of the Ethernet interface set as the default management interface.

    netmask

    Displays the network mask of the Ethernet interface set as the default management interface.

    gw

    Displays the IP address of the next-hop gateway for the Ethernet interface set as the default management interface.

    mtu

    Displays the maximum transmission unit (MTU) of the Ethernet interface set as the default management interface.

    Default circuit device (eth) IPV4 parameters

    ipaddress

    Displays the IP address of the Ethernet interface set as the default circuit interface.

    netmask

    Displays the network mask of the Ethernet interface set as the default circuit interface.

    gw

    Displays the IP address of the next-hop gateway for the Ethernet interface set as the default circuit interface.

    mtu

    Displays the maximum transmission unit (MTU) of the Ethernet interface set as the default circuit interface.

    Modified: 2015-12-28