Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Allocating DS0 Time Slots for T1 and E1 Ports for VComp Bundles (CTP Menu)

    If VComp bundles are built from T1/E1 channels, all channels for that bundle must come from the same T1/E1 port. For example, te-0/1 or te-0/2. The time slots are reset to default if you change the port type from T1 to E1 or vice versa, or if you change the signaling type on any T1 or E1 port.

    Before you begin:

    • Disable the bundle before you modify the bundle options.

    To allocate channels using the CTP Menu:

    1. From the Main Menu, select 1) Bundle Operations.
    2. Select 4) VCOMP.
    3. Select a bundle from the list.

      If you select an active bundle, you are prompted to disable the bundle before configuring it.

    4. Select 2) Config.
    5. Select 3) Channel Allocation.
    6. Follow the onscreen instructions, and configure the option as described in Table 1.

    Table 1: VComp Bundle DS0 Allocation Parameter Settings in the CTP Menu

    FieldFunctionYour Action

    Channel Allocation

    Specifies the time slots assigned to this bundle.

    The software displays the configured timeslots and the available time slots.

    Enter the number of the time slots that you want to configure for the bundle.

    • To enter a list of time slots, separate the list with commas.
    • To enter a range of time slots, separate the range with a hyphen (-).

    Modified: 2012-10-10