Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring 4WE&M Port Parameters for VComp Bundles (CTP Menu)

    This topic describes how to configure port parameters for 4WE&M interfaces.

    Before you begin:

    • Disable the bundle before you modify the bundle options.

    To configure port parameters for 4WE&M interfaces using the CTP Menu:

    1. From the Main Menu, select 1) Bundle Operations.
    2. Select 4) VCOMP.
    3. Select a bundle from the list.

      If you select an active bundle, you are prompted to disable the bundle before configuring it.

    4. Select 3) Port Config.
    5. Follow the onscreen instructions, and configure the options as described in Table 1.

    Table 1: VComp Bundle 4WE&M Port Parameter Settings in the CTP Menu

    FieldFunctionYour Action

    Voice port Tx gain

    Specifies the gain in the direction from the analog interface toward the IP network.

    Enter a number from -23.8 through 1.6 dB in intervals of 0.1 dB.

    Voice port Rx gain

    Specifies the gain in the direction from the IP network to the analog interface.

    Enter a number from -7.6 to 17.7 dB in intervals of 0.1 dB.

    Modified: 2013-03-26