Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring 2W-FXO Port Parameters for VComp Bundles (CTPView)
This topic describes how to configure port parameters for 2W-FXO interfaces.
Before you begin:
- Log in to the CTPView software at least at the Net_Admin level.
- Connect the CTPView server to the CTP device for which you want to configure bundles.
- Disable the bundle before you modify the bundle options.
To configure port parameters for 2W-FXO interfaces using CTPView:
- In the side pane, select Bundle > Configuration.
- Run your mouse over the Display and Select an Existing Bundle bar.
- In the table of bundles, select the bundle that you want to modify.
- Under Port Options, configure the parameters described in Table 1.
- Click Click to Submit Bundle AND Port Changes.
Table 1: VComp Bundle 2W-FXO Port Parameter Settings in CTPView
| Field | Function | Your Action |
|---|---|---|
Voice Port Tx Gain [ -15.0 to 10.4 dB ] | Specifies the gain in the direction from the analog interface toward the IP network. | Select a dB value from the list. |
Voice Port Rx Gain [ -15.0 to 10.4 dB ] | Specifies the gain in the direction from the IP network to the analog interface. | Select a dB value from the list. |
Voice Port Signaling | Specifies the type of analog signaling used. | Select one:
|
Voice Port PLAR | Private line automatic ringdown (PLAR) is not supported on FXO interfaces. | Not supported |
