Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the CTP Bundle Data Packet Protocol and OAM Port (CTP Menu)

    To configure the CTP Bundle Data Packet Protocol using the CTP Menu:

    1. From the Main Menu, select 5) Node Operations.
    2. Select 3) Configure network settings.
    3. Select 6) CTP Bndl Data pkt protocol. The following warning message is displayed.
      ***
      *** You are about to modify a system parameter that will require
      *** a system reboot when complete.
      ***
      *** If you decide to continue, the system will automatically
      *** reboot upon leaving these menus.
      ***
      *** Note: If these parameters are changed incorrectly,
      ***       system may not be reachable via the network
      ***       after the system reboots.
      ***
              Are you sure? y[n]: 
    4. When prompted, specify a value for the protocol ID for data packets in the range 2-254. The default value is 46.

    To configure a CTP Bndl OAM port (IPv6):

    1. From the Main Menu, select 5) Node Operations.
    2. Select 3) Configure network settings.
    3. Select 7) CTP Bndl OAM port (IPv6).
    4. When prompted, specify a port number for OAM packets in the range 2 through 254.

      The default value is 16.

    Modified: 2017-09-13