Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
  
[+] Expand All
[-] Collapse All

Configuring the CTP Bundle Data Packet Protocol and OAM Port (CTP Menu)

To configure the CTP Bundle Data Packet Protocol using the CTP Menu:

  1. From the Main Menu, select 5) Node Operations.
  2. Select 3) Configure network settings.
  3. Select 6) CTP Bndl Data pkt protocol. The following warning message is displayed.
    ***
    *** You are about to modify a system parameter that will require
    *** a system reboot when complete.
    ***
    *** If you decide to continue, the system will automatically
    *** reboot upon leaving these menus.
    ***
    *** Note: If these parameters are changed incorrectly,
    ***       system may not be reachable via the network
    ***       after the system reboots.
    ***
            Are you sure? y[n]: 
  4. When prompted, specify a value for the protocol ID for data packets in the range 2-254. The default value is 46.

To configure a CTP Bndl OAM port (IPv6):

  1. From the Main Menu, select 5) Node Operations.
  2. Select 3) Configure network settings.
  3. Select 7) CTP Bndl OAM port (IPv6).
  4. When prompted, specify a port number for OAM packets in the range 2 through 254.

    The default value is 16.

Modified: 2018-01-29