Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
  
[+] Expand All
[-] Collapse All

End-to-End BERT for CTP Bundles Overview

This topic provides an overview of how to set up end-to-end BERT for CTP bundles.

Figure 18 shows the normal data flow through the network. BERT is disabled.

Figure 18: Normal Data Flow

Normal Data Flow

To set up end-to-end BERTS for CTP bundles:

  1. To send BERT transmissions to the network, start BERT injection on each CTP bundle toward the IP network as shown in Figure 19.

    Figure 19: BERT Transmission to the Network

    BERT Transmission
to the Network
  2. To receive BERT reception from the network, start BERT reception on each bundle from the IP network as shown in Figure 20.

    Figure 20: End-to-End BERT Reception

    End-to-End BERT
Reception

The result is that end-to-end BERT transmission and reception are running as shown in Figure 21.

Figure 21: End-to-End BERT Transmission and Reception

End-to-End BERT
Transmission and Reception

Modified: 2018-01-29