TechLibrary

[+] Expand All

[-] Collapse All

Using Bundles to Create Logical Configurations for Physical Interfaces, CTP Release 7.3, CTPView Release 7.3
- Copyright and Trademark Information
- Table of Contents
- Overview
  - Overview of CTP Bundles
    - Types of Bundles Overview
    - Interface Naming Conventions for the CTP Series
    - Serial Multiservice Interface Module Overview
    - Adaptive Clocking Overview for CTP Bundles
    - Determining Optimal Packet Size for CTP Bundles Overview
    - Providing QoS for CTP Bundles by Using Service Type Overview
    - Circuit Startup Process Overview
    - Transparent Encoding Overview
    - TDM/TDC Encoding Overview
- Configuring CTP Bundles
- Administration
  - Activating, Disabling, Deleting, or Recentering CTP Bundles
    - Activating, Disabling, Deleting, or Recentering CTP Bundles (CTPView)
    - Activating, Disabling, Deleting, or Recentering for CTP Bundles (CTP Menu)
  - Querying CTP Bundles
  - Monitoring Packet Creation and Reception and Packet Delay for CTP Bundles
    - Using SCC Counts to Monitor Packet Creation and Reception for CTP Bundles (CTP Menu)
    - Using Buffer Sampling to Monitor Packet Delay for CTP Bundles (CTP Menu)
  - Diagnostic Testing for CTP Bundles Overview
    - Serial Loops for CTP Bundles Overview
    - BERT Testing for CTP Bundles Overview
    - End-to-End BERT for CTP Bundles Overview
  - Configuring Diagnostic Testing for CTP Bundles
  - Displaying BERT Status and Counters for CTP Bundles
    - Displaying BERT Status and Counters for CTP Bundles (CTPView)
    - Displaying BERT Status and Counters for CTP Bundles (CTP Menu)
  - Reducing the Number of SNMP Traps Generated for Late and Missing Packets
    - Reducing the Number of SNMP Traps Generated for Late and Missing Packets (CTP Menu)

Download This Guide

Download this guide: Using Bundles to Create Logical Configurations for Physical Interfaces, CTP Release 7.3, CTPView Release 7.3

Copyright and Trademark Information
Copyright © 2018 Juniper Networks, Inc. All rights reserved.
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. and/or its affiliates in the United States and other countries. All other trademarks may be property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
Using Bundles to Create Logical Configurations for Physical Interfaces, CTP Release 7.3, CTPView Release 7.3
Copyright © 2018 Juniper Networks, Inc. All rights reserved.
Revision History
January 2018—CTP Software Configuration Guide, CTP Release 7.3, CTPView Release 7.3
The information in this document is current as of the date on the title page.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted at http://www.juniper.net/support/eula/. By downloading, installing or using such software, you agree to the terms and conditions of that EULA.

TechLibrary

Download This Guide

Copyright and Trademark Information

Modified: 2018-01-29