Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Displaying the Management and Circuit Interface Settings (CTP Menu)

 

To display the configured network settings using the CTP Menu:

  1. From the CTP Main Menu, select 5) Node Operations.
  2. Select 2) Display network settings.

    Table 1 describes the fields corresponding to the configured network settings, including the status of the capability to segregate management and circuit traffic, displayed in the output.

Table 1: CTP Network Settings Display in the CTP Menu

Field Name

Field Description

Hostname

Hostname of the CTP device.

Protocols supported

Displays the protocols supported on the CTP device, such as IPv4 or IPv6.

Segregation between management and circuit traffic

Displays whether the functionality to segregate management and circuit traffic is configured (ON) or not (OFF).

Default management device (eth) IPV4 parameters

ipaddress

Displays the IP address of the Ethernet interface set as the default management interface.

netmask

Displays the network mask of the Ethernet interface set as the default management interface.

gw

Displays the IP address of the next-hop gateway for the Ethernet interface set as the default management interface.

mtu

Displays the maximum transmission unit (MTU) of the Ethernet interface set as the default management interface.

Default circuit device (eth) IPV4 parameters

ipaddress

Displays the IP address of the Ethernet interface set as the default circuit interface.

netmask

Displays the network mask of the Ethernet interface set as the default circuit interface.

gw

Displays the IP address of the next-hop gateway for the Ethernet interface set as the default circuit interface.

mtu

Displays the maximum transmission unit (MTU) of the Ethernet interface set as the default circuit interface.