Allocating Channels for Analog Interfaces for VComp Bundles (CTP Menu)
This topic describes how to allocate channels for VComp bundles.
You can configure up to 30 voice channels on a VComp bundle. These channels can be one type only. For example, if the first channel of a VComp bundle is a 4WE&M type; any additional channels added to the bundle must be of the same type.
Before you begin:
- Disable the bundle before you modify the bundle options.
To allocate channels using the CTP Menu:
- From the Main Menu, select 1) Bundle Operations.
- Select 4) VCOMP.
- Select a bundle from the list.
If you select an active bundle, you are prompted to disable the bundle before configuring it.
- Select 2) Config.
- Select 3) Channel Allocation.
- Follow the onscreen instructions, and configure the option as described in Table 1.
| Field | Function | Your Action |
|---|---|---|
Channel Allocation (for analog interfaces) | Adds interfaces to or removes interfaces from the bundle. It is important to note that the order of the channels (indicated by the XX: prefix on the channel allocation display) corresponds to the relative channel positions of the channels in the bundle. They connect on a one-to-one basis with the channels in the VComp bundle on the remote end of the network. When channels are removed from a VComp bundle, remaining channels are shifted left. | Select one:
|
