Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    Configuring Circuit Restart Parameters for SAToP Bundles (CTP Menu)

    This topic describes how to configure advanced options that are related to circuit starvation and restart. Set these parameters to the same values on the local and remote CTP devices.

    To configure circuit restart parameters using the CTP Menu:

    1. From the Main Menu, select 1) Bundle Operations.
    2. Select 2) SAToP.
    3. Select a bundle from the list.

      If you select an active bundle, you are prompted to disable the bundle before configuring it.

    4. Select 2) Config.
    5. Select 10) Advanced Options.
    6. Configure the options as described in Table 1.

    Table 1: SATOP Bundle Advanced Options Parameter Settings for Circuit Restart in the CTP Menu

    FieldFunctionYour Action

    Consecutive pkts loss to starve

    Specifies how many consecutive circuit packets the IP network must drop before the CTP device restarts the circuit.

    We recommend that you set the parameter to a larger value when the IP network uses packet-encrypting devices. These devices cause momentary interruption in packet flows when encryption keys are updated.

    Enter a number from 1 through 64.

    In sequence pkts after starve

    Specifies the number of in-sequence packets the CTP device must receive after a starvation before the circuit transitions from in-sync to running.

    Enter a number from 1 through 64.

     

    Related Documentation

     

    Modified: 2013-03-26