Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the Direction of the Circuit (CTPView)

    This topic describes how to configure the direction of the circuit.

    Before you begin:

    • Log in to the CTPView software at least at the Net_Admin level.
    • Connect the CTPView server to the CTP device for which you want to configure bundles.

    To configure the direction of circuits created with the CTP bundle using CTPView:

    1. In the side pane, select Bundle > Configuration.
    2. Run your mouse over the Display and Select an Existing Bundle bar.
    3. In the table of bundles, select the bundle that you want to modify.
    4. Under Bundle Options, configure the parameters as described in Table 1 and click Click to Submit Bundle AND Port Changes.

    Table 1: CTP Bundle Circuit Direction Setting in CTPView

    FieldFunctionYour Action

    Unidirectional Circuit

    Specifies whether the circuit is unidirectional or bidirectional. If unidirectional, specify the direction of the circuit—source or destination.

    Select one:

    • BI-DIRECTIONAL—Circuit is bidirectional.
    • SOURCE—Circuit is unidirectional, and this end of the circuit is the source.
    • DESTINATION—Circuit is unidirectional, and this end of the circuit is the destination.

    Modified: 2013-08-21