Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Adding a Bundle (CTP Menu)

    To add a bundle using the CTP Menu:

    1. From the CTP Main Menu, select 1) Bundle Operations.
    2. Select the type of bundle that you want to configure.

      Before you create a VComp bundle, you must ensure that the CTP system has a VComp card installed. The CTP system displays a warning message if no VComp card is installed. If you create a VComp bundle on a CTP system that does not have a VComp card installed and try to activate it, the CTP system displays the following warning message:

      There is not enough system DSP resource for the bundle.

      The bundle remains disabled until you install a VComp card and activate the bundle again. If you remove the VComp card from a CTP system that has an active VComp bundle, the Run state of the VComp bundle changes to MisCfg.

    3. Enter add to add a new bundle.
    4. Select the port you want to attach the bundle to.

    Modified: 2013-07-31