Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    End-to-End BERT for CESoPSN Bundles Overview

    This topic provides an overview of how to set up end-to-end BERT for CESoPSN bundles.

    Figure 1 shows the normal data flow through the network. BERT is disabled.

    Figure 1: Normal Data Flow

    Normal Data Flow

    To set up end-to-end BERTS for CESoPSN bundles:

    1. To send BERT transmissions to the network, start BERT injection on each CESoPSN bundle toward the IP network as shown in Figure 2.

      Figure 2: BERT Transmission to the Network

      BERT Transmission
to the Network
    2. To receive BERT reception from the network, start BERT reception on each bundle from the IP network as shown in Figure 3.

      Figure 3: End-to-End BERT Reception

      End-to-End
BERT Reception

    The result is that end-to-end BERT transmission and reception are running as shown in Figure 4.

    Figure 4: End-to-End BERT Transmission and Reception

    End-to-End
BERT Transmission and Reception

    Modified: 2014-10-01