Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
ContentIndex
  
[+] Expand All
[-] Collapse All

No index entries found.

Table of Contents

Overview
Overview of SAToP Bundles
SAToP Bundle Overview
SAToP Encapsulation for E1 Interfaces
SAToP Interoperability with M Series E1/T1 Circuit Emulation PICs Overview
Adaptive Clocking for SAToP Bundles Overview
Determining Optimal Packet Size for SAToP Bundles Overview
Bandwidth for Transporting SAToP Data
Packet Creation Delay
Performance of the IP Network
Providing QoS for SAToP Bundles by Using Service Type Overview
Loss Of Signal Detection Capability on CTP Bundles and SAToP Bundles
Detection of LOS on Serial Interfaces
Detection of T1/E1 Interfaces
Guidelines for Configuring LOS Detection
Configuration
Configuring SAToP Bundles
Configuring the Default Bundle Data Protocol on the CTP Device (CTP Menu)
Configuring IP Parameters for SAToP Bundles (CTPView)
Configuring IP Parameters for SAToP Bundles (CTP Menu)
Configuring Virtual IP Parameters for SAToP Bundles (CTPView)
Configuring Virtual IP Parameters for SAToP Bundles (CTP Menu)
Configuring Circuit Restart Parameters for SAToP Bundles (CTPView)
Configuring Circuit Restart Parameters for SAToP Bundles (CTP Menu)
Configuring the Missing Packet Fill Pattern for SAToP Bundles (CTPView)
Configuring the Missing Packet Fill Pattern for SAToP Bundles (CTP Menu)
Configuring T1 and E1 Port Parameters for SAToP Bundles (CTPView)
Configuring T1 and E1 Port Parameters for SAToP Bundles (CTP Menu)
Configuring Adaptive Clocking for SAToP Bundles (CTPView)
Configuring Adaptive Clocking for SAToP Bundles (CTP Menu)
Configuring LOS Detection on CTP and SAToP Bundles (CTP Menu)
Example
Example: Using SAToP Bundles to Interoperate with M Series Multiservice Edge Routers
Example: CTP Interoperability with M Series T1/E1 Circuit Emulation PICs

Modified: 2015-11-17