Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 

Table of Contents

Command Line Considerations
System Commands
Syslog Commands
To view help
To read current configured settings
To set syslog to output to a specific destination and enable
To disable syslog
SNMP Commands
To view SNMP help output
To view current system configuration for SNMP
To enable SNMP to allow access from any IP address
To disable SNMP
SNMP Traps Commands
To view SNMPTrap configuration help
To read current SNMPTrap configuration
To enable SNMPTraps to be sent to specific Trap receiver.
To disable SNMP
SNMP Traps
To view SNMP Trap configuration help
To read current SNMPTrap configuration
To enable SNMPTraps to be sent to specific Trap receiver
To disable SNMP
NTP
To view NTP configuration help
To read current NTP configuration
To enable NTP for specific server
To Disable NTP
Virtual IP Configuration
To view configured Virtual IP addresses (with expected output after reboot)
To delete a Virtual IP address
Bundle Configuration Commands
To add a bundle, define bundle number and type
To configure a bundle
To configure remote IP address
To configure remote cid and local cid
To Configure packet size (in bytes)
To configure buffer min/set/max (in milliseconds)
To configure the Time to Live in the IP packet (range 0-255)
To Configure the IP TOS byte in the IP packet (range 0-255)
To configure the IP TOS byte in the OAM packet (range 0-255)
To configure the OAM packet settings
To configure the port associated with the bundle
To configure the port interface type
To configure the port interface mode (DCE or DTE)
To configure the port interface encoding
To configure the port interface encoding
To configure the port interface speed
To configure the port interface clocking
To configure port Y-cable redundancy
To configure port high TT checking only
To configure bundle for direct drive
Bundle State Commands
To activate bundle
To disable bundle
To delete bundle
To recenter a buffer for bundle
Bundle Statistics Commands
To show bundle statistics
To clear port statistics
Port Statistics Commands
To query all on a port
To clear port statistics
Port Diagnostic Commands
To set serial loops on ports
To query serial loops on ports
To set BERTs on ports
To query BERT status on port:
Node Reference Commands
To display node summary
To configure node for external reference source
To configure node for external reference rate
Node Summary Commands
Unresolved xref
To get a summary of all cards installed
To get a summary of all daughter cards installed
To get a summary of all ports
To get a summary of all bundles
TACACS
Viewing the Current TACACS+ Configuration
Set Reclock RD to allign RD/RT
Unresolved xref
Ethernet Autoswitch Configuration
Configuring Ethernet Autoswitch From the CLI
Appendix
Working with syscfg
Accessing help for a Particular Utility
Viewing the Current NTP Configuration
Activating NTP on a CTP to a server

Modified: 2015-11-17