Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
ContentIndex
  
[+] Expand All
[-] Collapse All

No index entries found.

Configuring a Default Ethernet Interface (CTP Menu)

You are required to reboot the CTP device when you finish this configuration procedure.

To configure the default Ethernet interface by using the CTP Menu:

  1. From the Main menu, select 5) Node Operations.
  2. Select 3) Configure network settings.
  3. Select 2) IPv4 Configuration or 3) IPv6 Configuration.
  4. Follow the onscreen instructions to select and specify a default Ethernet interface.
  5. Configure the options as described in Table 3.

    Note: Do not add a route to the default Ethernet interface.

Table 3: Ethernet Interface Parameter Settings in the CTP Menu

FieldFunctionYour Action

Please input the hostname

Specifies the hostname for the CTP device.

Enter a name.

Please input the ip/ipv6

Specifies the IP address of the Ethernet interface.

Enter an IP address.

Please input the netmask

For IPv4 interfaces, specifies the network mask.

Enter the network mask.

Please input the gateway

On the default Ethernet interface, specifies the IP address of the default next-hop gateway, which is the Ethernet interface on the router.

Enter an IP address.

Please input the mtu in bytes

Specifies the maximum transmission unit (MTU) for the Ethernet interface.

For IPv4 networks, enter a number from 64 through 1500.

For IPv6 networks, enter a number of at least 1280.

Related Documentation

Modified: 2015-11-17