Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
ContentIndex
  
[+] Expand All
[-] Collapse All

No index entries found.

Ethernet Media Configuration Overview

You can configure the CTP Ethernet media to autonegotiate and set the speed to either 100 or 10 Mbps. By default, autonegotiation is enabled and the speed is to 1000 Mbps. If you choose to disable autonegotiation, the system prompts you to configure the desired speed.

The Ethernet configurations on CTP must match the configuration of the connected router or switch. Mismatched configurations, such as setting the CTP system to autonegotiate and the router to full duplex, will result in a misconfiguration and dropped packets. You must disable Cisco Discovery Protocol on the Fast Ethernet port connected to the CTP system.

Table 10 lists the valid Ethernet media configuration settings that CTP Series supports.

Table 10: Valid Ethernet Media Configuration Settings for CTP

Speed

Autoneg Status

Mode (Duplex)

MTU (up to 1500)

1000

ON

Full

any

100

OFF

Full

any

10

OFF

Full

any

Note: The CTP system supports only full duplex mode.

Related Documentation

Modified: 2015-11-17