Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary

Navigation Back up to About Overview

ContentIndex

[+] Expand All

[-] Collapse All

Using CESoPSN Bundles to Group DS0s on IP Circuits
- Copyright and Trademark Information
- Table of Contents
- List of Tables
- Overview
  - Using Bundles to Create Logical Configurations for Physical Interfaces Overview
    - Types of Bundles Overview
    - Interface Naming Conventions for the CTP Series
  - CESoPSN Bundle Overview
    - CESoPSN Bundle Overview
    - Providing QoS for CTP Bundles by Using Service Type Overview
- Configuration
  - Configuring CESoPSN Bundles (CTP Menu)
  - Configuring CESoPSN Bundles (CTPView)
- Administration
  - Diagnostic Testing for CESoPSN Bundles Overview
    - Serial Loops for CESoPSN Bundles Overview
    - BERT Testing for CESoPSN Bundles Overview
    - End-to-End BERT for CESoPSN Bundles Overview
  - Configuring Diagnostic Testing for CESoPSN Bundles
  - Displaying BERT Status and Counters for CESoPSN Bundles
    - Displaying BERT Status and Counters for CESoPSN Bundles (CTPView)
    - Displaying BERT Status and Counters for CESoPSN Bundles (CTP Menu)

No index entries found.

Download This Guide

Download this guide: Using CESoPSN Bundles to Group DS0s on IP Circuits

Related Documentation

Serial Loops for CESoPSN Bundles Overview

Configuring Serial Loops for CESoPSN Bundles (CTP Menu)

Serial loops will run on transparent circuits only if the transparent circuits use the SD and RD signals to transport data.

To configure serial loops with the CTP Menu:

From the CTP Main Menu, select 1) Bundle Operations.
Select 1) CTP.
Select a bundle from the list.
Select 8) Runtime Diags.
Select 1) Serial Loop.
Configure the Serial Loop option as described in Table 21.

Field	Function	Your Action
Serial Loop	Specifies the direction of the serial loop or removes the serial loop.	Select one: None—Removes the serial loop. To NET—Creates a loop toward the network. Data arriving from the IP network destined for the serial interface is looped back to the IP network and remote customer device. The data is still transmitted from the IP network to the serial interface, but data from the serial interface to the IP network and remote device is blocked. To I/F—Creates a loop toward the customer device attached to the serial interface. Data arriving from the serial interface that is destined for the IP network is looped back to the serial interface. The data is still transmitted from the serial interface to the IP network, but data from the IP network to the serial interface is blocked.

Related Documentation

Serial Loops for CESoPSN Bundles Overview

Modified: 2015-11-17

Previous Page Next Page