Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
ContentIndex
  
[+] Expand All
[-] Collapse All

No index entries found.

End-to-End BERT for CESoPSN Bundles Overview

This topic provides an overview of how to set up end-to-end BERT for CESoPSN bundles.

Figure 4 shows the normal data flow through the network. BERT is disabled.

Figure 4: Normal Data Flow

Normal Data Flow

To set up end-to-end BERTS for CESoPSN bundles:

  1. To send BERT transmissions to the network, start BERT injection on each CESoPSN bundle toward the IP network as shown in Figure 5.

    Figure 5: BERT Transmission to the Network

    BERT Transmission
to the Network
  2. To receive BERT reception from the network, start BERT reception on each bundle from the IP network as shown in Figure 6.

    Figure 6: End-to-End BERT Reception

    End-to-End
BERT Reception

The result is that end-to-end BERT transmission and reception are running as shown in Figure 7.

Figure 7: End-to-End BERT Transmission and Reception

End-to-End
BERT Transmission and Reception

Modified: 2015-11-17