TechLibrary

Navigation

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

Using CTP Bundles to Create Logical Configurations for Physical Interfaces

Software for CTP Series, CTPOS 7.2 and CTPView 7.2

Overview
Configuration
Administration
Troubleshooting

Using Bundles to Create Logical Configurations for Physical Interfaces Overview

Types of Bundles Overview

Interface Naming Conventions for the CTP Series

CTP Bundle Overview

Adaptive Clocking Overview for CTP Bundles

Determining Optimal Packet Size for CTP Bundles Overview

Providing QoS for CTP Bundles by Using Service Type Overview

Circuit Startup Process Overview

Network Node Reference Overview

Support for Multiple Master Nodes to Associate With a Single Slave Node in NetRef

Loss of Signal Detection Capability on CTP Bundles and SAToP Bundles

Guidelines for Configuring LOS Detection

Transparent Encoding Overview

Transparent Encoding Applications and Support Overview

How Basic Transparent Encoding Works

Using Phase-Correction FIFO Buffer with Transparent Encoding

Using Send Timing (ST) Clocking for Higher Speed Circuits with Transparent Encoding

TDM/TDC Encoding Overview
TDM/TDC Encoding Overview

Ethernet Media Configuration Overview
Ethernet Media Configuration Overview

Configuring CTP Bundles (CTP Menu)

Adding a Bundle (CTP Menu)

Configuring IP Parameters for CTP Bundles (CTP Menu)

Configuring Circuit Startup Parameters for CTP Bundles (CTP Menu)

Configuring the Direction of the Circuit (CTP Menu)

Configuring Virtual IP Parameters for CTP Bundles (CTP Menu)

Configuring IP Forwarding for CTP Bundles (CTP Menu)

Configuring the Missing Packet Fill Pattern for CTP Bundles (CTP Menu)

Configuring Signaling for CTP Bundles (CTP Menu)

Configuring Multiservice Port Parameters for CTP Bundles (CTPView)

Configuring Serial Port Parameters for CTP Bundles (CTP Menu)

Configuring Transparent Encoding for CTP Bundles (CTP Menu)

Configuring Bundle Pairs for TDM/TDC Operation (CTP Menu)

Configuring T1 and E1 Port Parameters for CTP Bundles (CTP Menu)

Configuring Multiservice Port Parameters for CTP Bundles (CTP Menu)

Configuring 4WTO Port Parameters for CTP Bundles (CTP Menu)

Configuring IRIG-B Port Parameters for CTP Bundles (CTP Menu)

Configuring Advanced Port Options for CTP Bundles (CTP Menu)

Selecting the Type of Clocking on Serial Ports for CTP Bundles (CTP Menu)

Configuring Custom Clocking for CTP Bundles (CTP Menu)

Configuring Adaptive Clocking for CTP Bundles (CTP Menu)

Configuring Ethernet Media (CTP Menu)

Displaying Ethernet Media Information (CTP Menu)

Configuring PBS and Bridge Ports (CTP Menu)

Configuring Port Mirroring for CTP Bundles (CTP Menu)

Configuring NetRef for Adaptive Bundle Operation

Configuring NetRef for Primary or Backup Operation

Configuring NetRef Multiple Master Nodes (CTP Menu)

Configuring NetRef Settings (CTPView)

Configuring LOS Detection on CTP and SAToP Bundles (CTP Menu)

Configuring Cryptographic Resynchronization (Crypto Resync)

Configuring CTP Bundles (CTPView)

Adding a Bundle (CTPView)

Configuring IP Parameters for CTP Bundles (CTPView)

Configuring Circuit Startup Parameters for CTP Bundles (CTPView)

Configuring the Direction of the Circuit (CTPView)

Configuring Virtual IP Parameters for CTP Bundles (CTPView)

Configuring IP Forwarding for CTP Bundles (CTPView)

Configuring the Missing Packet Fill Pattern for CTP Bundles (CTPView)

Configuring Signaling for CTP Bundles (CTPView)

Configuring Multiservice Port Parameters for CTP Bundles (CTP Menu)

Configuring Serial Port Parameters for CTP Bundles (CTPView)

Configuring Transparent Encoding for CTP Bundles (CTPView)

Configuring Bundle Pairs for TDM/TDC Operation (CTPView)

Configuring T1 and E1 Port Parameters for CTP Bundles (CTPView)

Configuring Multiservice Port Parameters for CTP Bundles (CTPView)

Configuring 4WTO Port Parameters for CTP Bundles (CTPView)

Configuring IRIG-B Port Parameters for CTP Bundles (CTPView)

Configuring Advanced Port Options for CTP Bundles (CTPView)

Selecting the Type of Clocking on Serial Ports for CTP Bundles (CTPView)

Configuring Custom Clocking for CTP Bundles (CTPView)

Configuring Adaptive Clocking for CTP Bundles (CTPView)

Configuring PBS and Bridge Ports (CTPView)

Configuring Port Mirroring for CTP Bundles (CTPView)

Configuring NetRef Settings (CTPView)

Activating, Disabling, Deleting, or Recentering CTP Bundles

Activating, Disabling, Deleting, or Recentering CTP Bundles (CTPView)

Activating, Disabling, Deleting, or Recentering for CTP Bundles (CTP Menu)

Querying CTP Bundles

Displaying the Running CTP Bundle Configuration, State, and Counters (CTP Menu)

Displaying the NetRef Node Synchronization Information (CTP Menu)

Displaying Running CTP Bundle Configuration, State, and Counters (CTPView)

Monitoring Packet Creation and Reception and Packet Delay

Using SCC Counts to Monitor Packet Creation and Reception for CTP Bundles (CTP Menu)

Using Buffer Sampling to Monitor Packet Delay for CTP Bundles (CTP Menu)

Searching for Bundles Based on Bundle Description from CTPView

Diagnostic Testing for CTP Bundles Overview

Serial Loops for CTP Bundles Overview

BERT Testing for CTP Bundles Overview

End-to-End BERT for CTP Bundles Overview

Configuring and Displaying Diagnostic Testing for CTP Bundles

Configuring Serial Loops for CTP Bundles (CTP Menu)

Configuring Serial Loops for CTP Bundles (CTPView)

Configuring BERT Testing for CTP Bundles (CTP Menu)

Configuring BERT Testing for CTP Bundles (CTPView)

Displaying BERT Status and Counters for CTP Bundles (CTP Menu)

Displaying BERT Status and Counters for CTP Bundles (CTPView)

Reducing the Number of SNMP Traps Generated for Late and Missing Packets
Reducing the Number of SNMP Traps Generated for Late and Missing Packets (CTP Menu)

Knowledge Base
http://kb.juniper.net/

Downloads

Using Bundles to Create Logical Configurations for Physical Interfaces