Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 

Resolved Issues

This section lists the issues that have been fixed in the Junos OS Release 18.2R1.

For the most complete and latest information about known Junos OS defects, use the Juniper Networks online Junos Problem Report Search application.

cSRX in Contrail

  • In certain cases, you might find that you are unable to properly configure the cSRX container when operating under the following conditions: PR1326218

    • Poll mode–After running the cSRX container for a long duration (hours or days), and operating under a stress of over 1 to 3 GB of UDP traffic and around 520K UDP sessions, the cSRX cannot be properly configured (for example, attempting to configure a new IPv6 address on ge-0/0/0 or ge-0/0/1).

      Workaround: Launch a new cSRX container if you encounter this behavior.

    • Interrupt mode–After running the cSRX container for a long duration (hours or days), and operating under a stress of 200 packets per second (pps) TCP traffic and 300 to 500 TCP sessions, the cSRX does not allow new configurations or may stop forwarding traffic.

      Workaround: Reduce the load on the cSRX container while sending stress traffic for long durations. If this does not resolve the issue, launch a new cSRX container.

  • You cannot configure pre-defined IDP policies from policy templates for a cSRX instance. The issue occurs because the set system scripts commit file templates.xsl command to load the pre-defined policy templates in cSRX is not available.PR1338101

Modified: 2018-06-28