Creating SD-WAN Site Performance Report Definitions
Use the SD-WAN Report Definitions page to create SD-WAN site performance report definitions for specific sites of a tenant and generate the report based on the definitions.
SD-WAN site performance reports enable you to analyze site performance based on the following parameters that measure the SLA performance of specific sites in a tenant:
Top 10 applications and link utilization for site
Top profiles not meeting SLA
Top profiles switching links
Top applications by highest packet loss
Top applications by highest latency
Top applications by highest jitter
SLA performance between two sites
Only users with the Tenant Administrator role can create SD-WAN site performance report definitions.
To create an SD-WAN site performance report definition:
- Select Reports > Report Definitions > SD-WAN.
The SD-WAN Report Definitions page appears.
- Click Add > Site Performance.
The Add SD-WAN Site Performance Report Definition page appears.
- Complete the configuration according to the guidelines
provided in Table 1.
Fields marked with * are mandatory.
- Click OK to save the report definition.
The report definition is saved and the SD-WAN Report Definition page appears.
A confirmation message appears on top of this page.
Table 1: Fields on the Site Performance Report Definition Page
Enter a unique string of alphanumeric characters and some special characters (: . -). No spaces are allowed and the maximum length allowed is 63 characters.
Enter a description for the report definition; maximum length allowed is 1024 characters.
Specify the duration (last 24 hours, last 7 days, last 30 days, or custom) for which you want the report to be generated.
If you select Custom, the From and To fields appear:
Number of Top Logs
Enter the number of top SLA events (1 through 20) that you want to retrieve and display for each section in the report.
Select one or more sites for which you want to generate the report. You can select up to five sites.
Select the content that you want to view in the report.
For more information about SLA parameters and dynamic mesh tunnels, see Traffic Steering Profiles and SD-WAN Policies Overview and Dynamic Mesh Tunnels Overview.
Select one or more sites, from the list of available sites, for which you want to generate the report.
Schedule Report Generation
Click Add Schedule to schedule the report generation.
The Add Report Schedule page appears.
Specify whether you want to generate the report immediately or schedule it for a later date and time:
The Add SD-WAN Tenant Performance Report Definition page appears with details of the report generation schedule.
Click Add Email Recipients to add e-mail addresses of recipients to whom you want to send the SD-WAN report.
The Add Recipients page appears.