Enable E-mail Notifications for SD-WAN Alarms
Starting from CSO Release 5.1.1, you now notify the user (tenant administrators and tenant operators) about SD-WAN alarms. You can also specify the minimum severity level of alarms that must be notified to the users. Alarm notifications enable users to take action to ensure that the network runs smoothly.
You can enable or disable the e-mail notification for SD-WAN alarms if you are an SP administrator, or OpCo administrator, or tenant administrator.
To enable e-mails notifications for SD-WAN alarms:
- Select Monitor > Alerts & Alarms > Definitions/Notifications.
The Definitions/Notifications page appears.
- Select the SD-WAN Alarm Notifications tab.
The SD-WAN Alarm Notifications page appears.
- Complete the configuration according to the guidelines
provided in Table 1.
Fields marked with an asterisk (*) are mandatory.
- Click Save to save the changes.
If you have enabled e-mail notifications, an e-mail will be sent to the user based on the severity level that you specified for an alarm.
If you have disabled e-mail notifications, the users will not receive e-mail notifications in case of alarms.
Table 1: SD-WAN Alarm Notifications Settings
Send Email Notifications
Click the toggle button to enable or disable the e-mail notifications of alarms to users. By default, e-mail notifications are disabled.
After enabling this field, you must specify the minimum severity level of the alarm and select the e-mail addresses of the users.
Minimum Severity to Report
Select the minimum severity level (critical, major, minor) of the alarms to users through an e-mail.
Select one or more e-mail addresses of the users from the list. Only users with tenant administrator or tenant operator roles are listed.
The e-mail addresses listed are based on the users that are listed in the Administration > Users page.