Discover an EX Series Switch or APs Configured Behind a CPE
To discover an EX Series switch or an access point (AP) connected to an SRX Series Customer Premise Equipment (CPE) device, you must enable LLDP on the CPE device interface to be connected to the switch or the AP.
On completing configuration of a zone-based LAN segment for providing management connectivity between a CPE and a switch or an AP, CSO applies the configuration and displays the switch connected to the CPE on the Site Management page and Device page, if a switch is already connected to the CPE.
To view a switch or an AP which is connected to a CPE at any time time, use the following steps:
- Click Resources > Devices.
The Devices page is displayed.
- Select the CPE from the list and click Discover Connected
CSO displays the switch or the AP connected to the CPE in the Device Name column on Devices page (Resources > Devices).
CSO also displays the number of switches connected to the CPE in Connected Switches column on Site Management page (Resources > Site Management).