Edit Tenant Parameters
You, as an SP administrator or OpCo administrator, can modify the parameters configured for a tenant from the Tenants page.
To modify the parameters configured for a tenant:
- Select Tenants.
The Tenants page appears.
- Select the tenant whose parameters you want to modify
and click the Edit icon (pencil).
The Edit Tenant page appears, displaying the same fields that are presented when you add a tenant.
- Modify the tenant parameters as needed. For more information on these parameters, see Adding a Single Tenant.
- Click Save to save the changes or click Cancel to discard the changes.
If you click Save, the changes that you made for the tenant are saved.
Subsequently, a tenant edit job is triggered and a confirmation message, indicating that a tenant edit job is created successfully, appears on the Tenant Settings page.
- (Optional) You can click the job name in the message to
view details of the job (including job status, start date and time,
and end date and time) on the Update tenant settings Details page. Alternatively, you can view the status of the job on the Jobs
(Monitor > Jobs) page.
If the job is completed successfully, a confirmation message appears on top of the Tenants page.
Table 1 describes the tenant parameters that you can modify.
Table 1: Tenant parameters
You cannot modify the name of the tenant.
Password Expiration Days
The settings are applicable to all new users and users whose password has expired.
Services for Tenant
You can add or remove one or more services for the tenant.
Note: The changes are applied to newly-added sites only.
Note: This field appears only if you have selected the SD-WAN in the Services for Tenant field.
This field is read-only if the tenant is using the Secure SD-WAN Advanced service. However, if the tenant is using the Secure SD-WAN Essentials service, you can upgrade the service level to Advanced by selecting the Advanced option.
Tenant with SD-WAN capability
You can modify the following parameters only before SD-WAN sites are added by the tenant:
You can modify the following parameters even after SD-WAN sites are added by the tenant:
Tenant with Security Services