Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Predefined Configuration Templates

 

Contrail Service Orchestration (CSO) provides predefined configuration templates that you can access from the Configuration Templates page (Resources > Configuration Templates).

Predefined configuration templates are available for SRX Series, NFX150, and NFX250 devices:

  • Table 1 lists the predefined configuration templates for SRX Series and NFX Series (NFX150 and NFX250) devices.

  • Table 2 lists the predefined configuration templates for SRX Series devices.

  • Table 3 lists the predefined configuration templates for NFX150 devices.

  • Table 4 lists the predefined configuration templates for NFX250 devices.

Table 1: Predefined Configuration Templates for SRX Series and NFX Series (NFX150 and NFX250) Devices

Name

Description

common-banner

Configure the banner that appears when you log in to an SRX or NFX Series device.

common-disable-auto-negotiation

Disable Ethernet autonegotiation on the interfaces of an SRX or NFX Series device.

If you disable Ethernet autonegotiation, you must configure values for link mode and link speed when you deploy the template.

common-dns

Configure Domain Name System (DNS) server settings on an SRX or NFX Series device.

common-firewall-filters

Configure firewall filters that determine whether to allow or deny traffic before it enters or exits a port to which the firewall filter is applied.

common-idp-sensor-packet-log

Configure an SRX or NFX Series device for packet capture, by defining the amount of memory to be allocated for packet capture and the maximum number of sessions that can generate packet capture data for the device at a time.

common-lacp

Configure link aggregation control protocol (LACP) on an SRX or NFX Series device.

common-local-user

Configure a local user on an SRX or NFX Series device.

common-nat-global-settings

Configure network address translation (NAT) settings (such as pool utilization alarms, port randomization, and so on) on an SRX or NFX Series device.

common-ntp

Configure Network Time Protocol (NTP) settings on an SRX or NFX Series device.

common-password-config

Change the default password for a root user on an SRX or NFX Series device.

common-pre-id-default-policy

Configure the default policy action that occurs prior to dynamic application identification (AppID).

During the initial policy lookup phase, which occurs prior to a dynamic application being identified, if there are multiple policies present in the potential policy list, an SRX or NFX Series device applies the default security policy until a more explicit match is found.

common-sdwan-dhcprelay

Configure extended DHCP relay and DHCPv6 relay options on an SRX or NFX Series device and enable the device to function as a DHCP relay agent. A DHCP relay agent forwards DHCP Request and DHCP Reply packets between a DHCP client and a DHCP server.

common-service

Configure the FTP, SSH, and NETCONF settings on an SRX or NFX Series device.

common-snmp-config-basic

Configure basic SNMP version 2 (SNMPv2) parameters on an SRX or NFX Series device.

common-static-routes

Configure static routes to be installed in the routing table for an SRX or NFX Series device.

You can specify one or more routes within a single static statement, and you can specify one or more static options in the configuration.

For more information, see static (Routing Options).

common-syslog

Configure syslog settings on an SRX or NFX Series device.

common-UTM-global

Configure the routing instance, on an SRX or NFX Series device, through which the DNS server can be reached to resolve the unified threat management (UTM) Web filtering URL.

Table 2: Predefined Configuration Templates for SRX Series Devices

Name

Description

ngfw-ipsec-vpn

Configure IPsec VPN settings for an SRX next-generation firewall (NGFW) device.

srx-dhcp

Configure an SRX Series device as a Dynamic Host Configuration Protocol (DHCP) server.

srx-dns

Configure Domain Name System (DNS) server settings on an SRX Series device.

srx-hub-breakout-stage2-config

Use this template to configure NAT on WAN links of provider hubs for breakout traffic. You can configure NAT on provider hubs with DATA_ONLY and OAM_AND_DATA capabilities.

The configuration template can be applied per tenant provided, the tenant has at least one branch site connected to the provider hub configured for NAT.

Note: You can configure NAT using the template only on existing WAN links and not on additional WAN links later added by tenants.

Interface-based source NAT is used as the tunnel in the NAT configuration template.

srx-sdwan-dhcp-relay

Configure extended DHCP relay and DHCPv6 relay options on an SRX Series device and enable the device to function as a DHCP relay agent. A DHCP relay agent forwards DHCP Request and DHCP Reply packets between a DHCP client and a DHCP server.

srx-sdwan-mgmnt

Configure the SNMP version 3 (SNMPv3), NTP, syslog, and TACACS parameters for managing an SRX Series device.

For TACACS and SNMPv3 settings to work on the device on which you are deploying the configuration template, you must enable the Allow TACACS Access and Allow SNMP Access toggle buttons in the associated device template.

srx-vrrp

Configure virtual router redundancy protocol (VRRP) on an SRX Series device.

Table 3: Predefined Configuration Templates for NFX150 Devices

Name

Description

nfx3-sdwan-mgmnt

Configure the SNMPv3, NTP, syslog, and TACACS parameters for managing an NFX150 device.

For TACACS and SNMPv3 settings to work on the device on which you are deploying the configuration template, you must enable the Allow TACACS Access and Allow SNMP Access toggle buttons in the associated device template.

Table 4: Predefined Configuration Templates for NFX250 Devices

Name

Description

nfx-cluster-sdwan-gwr-dhcprelay

Configure extended DHCP relay and DHCPv6 relay options on an NFX250 cluster and enable the cluster to function as a DHCP relay agent. A DHCP relay agent forwards DHCP Request and DHCP Reply packets between a DHCP client and a DHCP server.

nfx-sdwan-gwr-mgmnt

Configure the SNMPv3, NTP, syslog, and TACACS parameters for managing the gateway router (vSRX) on an NFX250 device.

For TACACS and SNMPv3 settings to work on the device on which you are deploying the configuration template, you must enable the Allow TACACS Access and Allow SNMP Access toggle buttons in the associated device template.

nfx-sdwan-jcp-mgmnt

Configure the SNMPv3, NTP, syslog, and TACACS parameters for managing the Junos Control Plane (JCP) component of an NFX250 device.

For TACACS and SNMPv3 settings to work on the device on which you are deploying the configuration template, you must enable the Allow TACACS Access and Allow SNMP Access toggle buttons in the associated device template.

nfx-sdwan-jdm-mgmnt

Configure the SNMPv3, NTP, syslog, and TACACS parameters for managing the Juniper Device Manager (JDM) component of an NFX250 device.

For TACACS and SNMPv3 settings to work on the device on which you are deploying the configuration template, you must enable the Allow TACACS Access and Allow SNMP Access toggle buttons in the associated device template.