Add Provider Hub Sites for a Tenant
Provider hub sites are logical entities that connect on-premises spoke sites, cloud spoke sites, or enterprise hub sites to provider hub devices through overlay tunnels in an SD-WAN deployment. When users with Tenant Administrator role add provider hub sites, it enables the tenant’s sites to backhaul traffic to the provider hub devices and to the Internet.
Before a Tenant Administrator user can add provider hub sites in Customer Portal, an SP Administrator or an OpCo Administrator user must add the provider hub devices (with DATA_ONLY or OAM_AND_DATA capabilities) in Administration Portal.
To add one or more provider hub sites:
- Select Resources > Site Management.
The Site Management page appears.
- Click Add and select Add Provider Hub.
The Add Provider Hub for Tenant-Name page appears.
- Complete the configuration settings according to the guidelines
provided in Table 1.
Fields marked with an asterisk (*) are mandatory.
- Click OK.
CSO triggers a job and displays a job link. You are returned to the Site Management page. When the job is finished, the provider hub sites are listed, with the Site Status displaying Provisioned.
Table 1: Fields on the Provider Hub for <Tenant-Name> Page
Select the POP from which you want to specify the provider hub device.
Hub Device Name
Select one or more provider hub devices from the list. (Provider hub devices with DATA_ONLY and OAM_AND_DATA capabilities are listed.)
If you select two or more provider hubs, the CSO provisions the provider hub sites in the order in which you selected the provider hub devices.
See CSO SD-WAN Deployment Workflow for the next task.