Updating Stage-2 Configuration Template in a Device Template
Each device template has a set of configuration templates that can be used to deploy additional configuration on to the CPE device after it is activated. These templates are known as stage-2 configuration templates. You can add or remove stage-2 configuration templates from a device template.
By default, the CPE device configuration is not supported on the CPE device. If you need the CPE device configuration, then you must configure it through stage-2 configuration in the device templates.
To add a stage-2 configuration template:
- Select Resources > Templates > Device Template.
The Device Templates page appears.
- Select a device template for which you want to add the
stage-2 configuration and select Edit Device Template > Stage-2
The Stage-2 Configuration Templates page appears. Table 1 lists the fields (and their descriptions) on the Stage-2 Configuration Templates page.
- Click the add icon (+) and complete the configuration settings according to the guidelines provided in Table 2.
- Click Save.
The new stage-2 configuration template is included in the device template.
Table 1: Fields on the Stage-2 Configuration Templates Page
View the name of the stage-2 configuration template.
Example: LAN side config
View the name of the component through which the settings are configured. The components that are currently supported are:
Displays whether the template is hidden on Customer Portal.
Copy input from
Displays the template from which you copied the settings.
Displays whether the stage-2 configuration is automatically pushed to the device during ZTP process.
Displays whether the stage-2 configuration template is enabled for all tenants, no tenants, or specific tenants.
Table 2: Fields on the Add New Template Page
Select the configuration template from the drop-down list. The configuration templates are designed in the Configuration Designer tool.
Specify the name of the template that you want to display on the configuration interface.
Example: SDWAN Config
Specify the component name through which the settings are configured. The components that are currently supported are:
Specify whether you want to hide the configuration template on Customer Portal. You might want to choose to hide the template if you are reusing the template for multiple components.
Copy From Template
If you have chosen to hide the configuration template on the user interface, then specify the template from which you want to copy the settings.
Specify whether the stage-2 configuration must be automatically pushed to the device during ZTP process. The available options are
You can enable the stage-2 configuration template for all tenants, specific tenants, an SP administrator or an OpCo administrator.
Note: Only users with SP administrator or OpCo administrator role can enable stage-2 configuration templates.
The available options are:
The default option is All Tenants.
To remove a stage-2 configuration template:
- Select Resources > Templates > Device Templates.
The Device Templates page appears.
- Select the device template for which you want to remove
the stage-2 configuration and then select Edit Device Template
> Stage-2 Config Templates.
The Stage-2 Config Templates page appears.
- Select a configuration template and click the delete icon
A page requesting confirmation for the deletion appears.
- Click Yes to confirm that you want to delete
the stage-2 configuration template.
The configuration template is deleted.