Software Support
Software Downloads
Table 1 displays the supported
versions and download links for software components associated with
CSO Release 5.4.0.
NoteBefore you onboard devices, ensure that the device is
running the software version that is recommended in this release notes.
In CSO
Release 5.4.0, you can continue to manage devices running Junos OS
Release 15.1X49-D172 that were onboarded in the earlier releases of
CSO. However, if you are upgrading Junos OS on a device that is managed
by CSO Release 5.4.0 or onboarding a device newly to CSO Release 5.4.0,
the device must run Junos OS Release 19.3R2-S3.
Table 1: Software Components
Associated with CSO Release 5.4.0
Product | Supported Version | Download Link |
---|
Juniper Identity Management Service (JIMS) | 1.1.5R1 | Pre-bundled with CSO. |
NFX150 CPE device | Junos OS Release 19.3R2-S5 | |
NFX250 CPE device | Junos OS Release 18.4R3-S5 with 19.3R2-S5 for vSRX3.0 Junos OS Release 15.1X53-D497 with 15.1X49-D172 for vSRX if
vSRX was onboarded in an earlier version of CSO | |
SRX Series CPE devices | Junos OS Release 19.3R2-S5 | SRX300, SRX320, SRX340, SRX345, and SRX550 High Memory Services
Gateway (SRX550M) (as spoke devices): SRX1500 SRX4100, SRX4200: |
SRX Series next-generation firewall devices | Junos OS Release 19.3R2-S5 | SRX300, SRX320, SRX340, SRX345, SRX550, SRX550M: SRX1500 SRX4100, SRX4200: |
SRX Series provider hub devices | Junos OS Release 19.3R2-S5 | |
SRX Series enterprise hub devices | Junos OS Release 19.3R2-S5 | SRX1500: SRX4100, SRX4200:
|
vSRX for SD-WAN devices | Junos OS Release 15.1X49-D172 for devices onboarded in
earlier versions of CSO Junos OS Release 19.3R2-Sd | For hub devices (enterprise hub and provider hub) and
spoke devices: vSRX (compressed tar file (TGZ) for upgrade): vSRX (KVM appliance): vSRX (Hyper-V image): vSRX (VMware appliance with SCSI virtual disk (.ova)): vSRX (VMware appliance with IDE virtual disk (.ova)):
|
vSRX for next-generation firewall devices | Junos OS Release 18.4R1 Junos OS Release 19.3R2-S5 | vSRX (compressed tar file (TGZ) for upgrade): vSRX (KVM appliance): vSRX (Hyper-V image): vSRX (VMware appliance with SCSI virtual disk (.ova)): vSRX (VMware appliance with IDE virtual disk (.ova):
|
vSRX3.0 for SD-WAN devices, next-generation firewall,
and hub devices | Junos OS Release 19.3R2-S5 | vSRX3.0 (compressed tar file (TGZ) for upgrade): vSRX3.0 (KVM appliance): vSRX3.0 (Hyper-V image): vSRX3.0 (VMware appliance with SCSI virtual disk (.ova)): vSRX3.0 (VMware appliance with IDE virtual disk (.ova)):
|
Software Installation Requirements for NFX Series Network Services
Platform
When you set up a distributed deployment with an NFX150
or an NFX250 device, you must use Administration Portal or the CSO
API to:
- Upload the software image to CSO.Note
If
you are an OpCo administrator or a tenant administrator and if you
need to upload the required software image, contact Juniper Networks
Technical Assistance Center (JTAC).
- Specify this image as the boot image when you configure
activation data.
For more information on NFX series documentation, see https://www.juniper.net/documentation/product/en_US/nfx150 and https://www.juniper.net/documentation/product/en_US/nfx250 .