Add a MAC Address Endpoint
Use the MAC address page to add a MAC address, which you can specify as a source endpoint or destination endpoint in firewall filter terms.
To add a MAC address:
- Select Configuration > Shared Objects > MAC.
The MAC address page appears.
- Click the add icon (+) to add a new MAC address.
The Add MAC Endpoint page appears.
- Complete the configuration according to the guidelines
provided in Table 1.
Note Fields marked with * are mandatory.
- Click OK to save the changes. If you want to
discard your changes, click Cancel instead.
The MAC address is created. You are returned to the MAC Addresses page where a confirmation message is displayed.
Table 1 provides guidelines on using the fields on the Add MAC Endpoint page.
Table 1: Fields on the Add MAC Endpoint Page
Field | Description |
|---|---|
Name | Enter a valid MAC address. MAC address must be 12 digit hexadecimal number. Format: ([0-9a-fA-F][0-9a-fA-F][:|-|.]){5}([0-9a-fA-F][0-9a-fA-F]) Example: 00:11:22:33:44:55 |
Description | Enter a description for the MAC address. |
WHAT'S NEXT
After adding MAC address, you can specify the MAC address as source endpoint or destination endpoint in firewall filter terms, see Add Terms to Firewall Filters.