Help Center User GuideGetting StartedFAQ
 
X
User Guide
Getting Started
FAQ
Contents  

Dissociate a Configuration Template from a Device

As a tenant administrator, you can dissociate a configuration template when you no longer want the template to be associated with your device. Dissociating a configuration template removes references to the configuration template from the device but does not remove the configuration pushed to the device.

To remove the configuration pushed to the device, you must undeploy the configuration template. See Undeploy a Configuration Template from a Device for details.

Procedure

To dissociate a configuration template:

  1. Select Resources > Devices.

    The Devices page appears.

  2. Click the Device-Name link for the device from which you want to dissociate the configuration template.

    The Device-Name page appears.

  3. From the Configuration Template tab, select the configuration template that you want to dissociate from the device and click Dissociate.

    An alert message appears, asking you to confirm the dissociate operation.

  4. Click Yes.

    If the dissociation is successful, a confirmation message appears, indicating that the references to the configuration template were removed from the device.

    If the dissociation fails, repeat the procedure to dissociate the configuration template.

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit