Help Center User GuideGetting StartedFAQ
 
X
User Guide
Getting Started
FAQ
Contents  

Edit or Delete Port Endpoint

You can edit or delete ports from the Ports page.

Edit Ports

Note You cannot modify the name of the port.

Procedure

To modify the parameters configured for a port:

  1. Select Configuration > Shared Objects > Ports.

    The Ports page appears.

  2. Select the port that you want to edit, and then click on the edit icon (pencil), on the top right corner of the table.

    The Edit Port Endpoint page appears, showing the same options as those displayed when you create a new port.

  3. Modify the description for the port.
  4. Click OK to save the changes. If you want to discard your changes, click Cancel instead.

The modified port endpoint description appears on the Ports page.

Delete Ports

Procedure

To delete a port:

  1. Select Configuration > Shared Objects > Ports.

    The Ports page appears.

  2. Select the port that you want to delete and then click the delete icon.

    An alert message appears to verify that you want to delete the selected port.

  3. Click Yes to delete the selected port. If you do not want to delete, click No instead.

The deleted port is removed from the Ports page.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit