Help Center User GuideGetting StartedFAQ
 
X
User Guide
Getting Started
FAQ
Contents  

Add a MAC Address Endpoint

Before You Begin

Use the MAC address page to add a MAC address, which you can specify as a source endpoint or destination endpoint in firewall filter terms.

Procedure

To add a MAC address:

  1. Select Configuration > Shared Objects > MAC.

    The MAC address page appears.

  2. Click the add icon (+) to add a new MAC address.

    The Add MAC Endpoint page appears.

  3. Complete the configuration according to the guidelines provided in Table 302.

    Note Fields marked with * are mandatory.

  4. Click OK to save the changes. If you want to discard your changes, click Cancel instead.

    The MAC address is created. You are returned to the MAC Addresses page where a confirmation message is displayed.

Table 302 provides guidelines on using the fields on the Add MAC Endpoint page.

Table 302: Fields on the Add MAC Endpoint Page

Field

Description

Name

Enter a valid MAC address. MAC address must be 12 digit hexadecimal number.

Format: ([0-9a-fA-F][0-9a-fA-F][:|-|.]){5}([0-9a-fA-F][0-9a-fA-F])

Example: 00:11:22:33:44:55

Description

Enter a description for the MAC address.

WHAT'S NEXT

After adding MAC address, you can specify the MAC address as source endpoint or destination endpoint in firewall filter terms, see Add Terms to Firewall Filters.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit