Help Center User GuideGetting StartedFAQ
User Guide
Getting Started

Disable Ports

You disable a port to block traffic through the port. When you disable a port, the Admin status and Link status of the port are changed to Down.

Note You can disable one or more ports at the same time.


To disable one or more ports:

  1. Select the ports and click More > Disable Port(s). Alternatively, right-click the port and click Disable Port(s)

    A job to disable the ports is initiated.

After a port is disabled, the Admin and Link statuses for the port are set to Down.

Note The device is monitored once every five minutes. Therefore, it takes upto five minutes for the change in the Admin Status and Link Status to reflect on the GUI.

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      

Additional Comments

800 characters remaining

May we contact you if necessary?


Need product assistance? Contact Juniper Support