Help Center User GuideGetting StartedFAQ
 
X
User Guide
Getting Started
FAQ
Contents  

Manage a Single CPE Device

Users with the Tenant Administrator role can use the Device-Name page (Resources > Devices > Device-Name) to view details of and manage a customer premises equipment (CPE) device and an EX Series switch.

This topic provides information about managing a CPE device. For information about managing an EX Series switch, see Manage an EX Series Switch .

To manage a CPE device:

Table 105: Fields on the SRX Root Password Tab

Field

Description

Edit Settings for SRX root password 

Password

Enter your new password.

The password that you set must be between 6 and 21 characters long, and it must include at least one lowercase letter, one uppercase letter, one special character, and one number.

Confirm Password

Reenter the password for confirmation.

Table 106: Fields on the NFX Root Password Tab

Field

Description

Edit Settings for NFX root password 

Password

Enter your new password.

The password that you set must be between 6 and 21 characters long, and it must include at least one lowercase letter, one uppercase letter, one special character, and one number.

Confirm Password

Reenter the password for confirmation.

Table 107: Fields on the APN Configuration Tab

Field

Description

Edit Settings for APN Configuration 

Use default APN settings

Click the toggle button to change the default APN settings.

  • Enabled(Default)—Select this option to use the default APN setting that is shipped along with the CPE device.

  • Disabled—Select this option to configure the APN settings.

APN Settings 

APN Name

Enter the access point name (APN) of the gateway router. The name can contain alphanumeric characters and special characters.

SIM Change Required

Click the toggle button to change the SIM card.

  • Enabled(Default)—Select this option to change the APN settings and to use a new SIM card.

  • Disabled—Select this option to change the APN settings without changing the SIM card.

Authentication Method

Select the authentication method for the APN configuration.

  • PAP— Select to use Password Authentication Protocol (PAP) authentication. This is the default option.

  • CHAP— Select to use Challenge Handshake Authentication Protocol (CHAP) authentication.

  • None—Select to indicate that there is no authentication method.

Authentication Info 

SIP User ID

Enter the Session Initiation Protocol (SIP) user ID for authentication if you have selected the APN authentication method as either PAP or CHAP.

SIP Password

Enter the SIP password for authentication if you have selected the APN authentication method as either PAP or CHAP.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit