ON THIS PAGE
Application Quality of Experience Overview
Contrail Service Orchestration (CSO) supports Application Quality of Experience (AppQoE) that enables you to effectively prioritize, segregate, and route business-critical application traffic without compromising performance or availability.
AppQoE utilizes the capabilities of two application security services:
Application identification (AppID) to identify specific applications in your network.
Advanced policy-based routing (APBR) to specify a path for the application traffic.
AppQoE-enabled devices perform service- level agreement (SLA) measurements across the available WAN links, and then dynamically map the application traffic to the path that best serves the application’s SLA requirement.
AppQoE is applicable only for SD-WAN sites.
AppQoE is supported on the following devices in both hub-and-spoke and full mesh topologies:
You can configure an AppQoE between two SRX Series device endpoints (book-ended) when both the devices run the same version of Junos OS.
CSO pushes the SLA parameters, path selection parameters and
related configuration to the device and the device monitors the links
for SLA violation. If there is a violation, the device switches the
link and generates
PATH_SELECTED system log messages. The device also aggregates and averages the
SLA metrics, and generates periodic
APPQOE_APP_PASSIVE_SLA_METRIC_REPORT system log messages.
AppQoE measures the application performance across multiple links by collecting real-time data by continuously the monitoring application traffic and identifying any network or device issues by sending active and passive probes. To monitor the SLA compliance of the link on which the application traffic is sent, the Customer Premises Equipment (CPE) device sends inline probes (called passive probes) along with the application traffic. Additionally, to identify the best available link for an application if the active link fails to meet the SLA criteria, the CPE constantly monitors and collects the SLA compliance data for the other available links by sending probes (called active probes) over the links. The active probes are sent based on the probe parameters that you configure in the application traffic type profile.
The CPE device switches links at the application level, which means that only the traffic corresponding to the application that reported the SLA violation is moved to a link that meets the specified SLA. Traffic for the remaining applications remain on the same link until those applications report an SLA violation.
You can configure traffic type profiles to specify the class of service (CoS) and probe parameters for each traffic type. When you add a steering profile (SLA-based or path-based), you specify the SLA parameters and SLA sampling criteria, and link the steering profile with a traffic type profile. The steering profile is then linked to an SD-WAN policy intent and the SD-WAN policy is deployed to enable AppQoE.
You can view the SLA performance details of all tenants from the Tenant SLA Performance (Monitor > Tenant SLA Performance) page. For more information on the AppQoE workflow, see Configure and Monitor Application Quality of Experience.
Benefits of Application Quality of Experience
Enables cost-effective QoE by real-time monitoring of application traffic, which provides a consistent and predictable level of service.
Improves the user experience at the application level by ensuring that the application data is sent over the most SLA-compliant link.