Table 1 displays the supported versions and download links for software components associated with CSO Release 5.2.0.
Note
Before you onboard devices, ensure that the device is running the software version that is recommended in this release notes.
CSO Release 5.2.0 extends Beta support for Junos OS Release 19.3R2-S2.
Table 1: Software Components Associated with CSO Release 5.2.0
We recommend that you use Junos OS Release 15.1X49-D172 in your production environment instead of Junos OS Release 19.3R2-S2 because of the following known limitations in Junos OS Release 19.3R2-S2:
Note
The issue related to ZTP not progressing in an SRX3xx dual CPE cluster, if secure OAM tunnel from the master node is down is resolved in Junos OS Release 19.3R2-S2.
We recommend you to use Junos OS Release 19.3R2-S2.2 for an SRX3xx dual CPE cluster.
Connection fails when traffic is sent through an NFX250 device on which vSRX is installed. [PR 1483425]
Sometimes, vSRX when running on an NFX250 device does not show the ge- interfaces after you upgrade the image from Junos OS Release 15.1X49-D172.1 to Junos OS Release 19.3R2-S1. [PR 1482360]
In an SRX1500 dual-CPE cluster, you cannot add a license to the backup node by using the request system license add command. [PR 1485128]
GRE interface in an NFX150 device may appear as down, even though it is actually up. [PR 1456184]
Zero-touch provisioning (ZTP) of a device running Junos OS Release 19.3R2-S1 may fail due to failure in installing the default-trusted certificate authority (CA). [PR 1472607]
Full mesh dynamic VPN tunnel formed through a device running Junos OS 19.3R2-S1 may not come up. [PR 1482984]
LAN traffic may be interrupted while configuring a full mesh DVPN tunnel on a device running Junos OS Release 19.3R2-S1. [PR 1484083]
During ZTP of an SRX1500 dual CPE cluster, the devices in the cluster reboot automatically. [PR 1484257]
When you set up a distributed deployment with an NFX150 or an NFX250 device, you must use Administration Portal or the CSO API to:
Note Only an SP administrator can upload the software image to CSO. If you are an OpCo administrator or a tenant administrator and if you need to upload the required software image, contact Juniper Networks Technical Assistance Center (JTAC).
For more information on NFX series documentation, see https://www.juniper.net/documentation/product/en_US/nfx150 and https://www.juniper.net/documentation/product/en_US/nfx250 .