Help Center User GuideGetting StartedFAQ
 
X
User Guide
Getting Started
FAQ
Contents  

About the Port Profiles Page

To access this page, select Configuration > SD-LAN > Port Profiles in Customer Portal.

Use this page to view, edit, clone, and delete port profiles. A port profile authenticates supplicants (users and devices such as a printer) trying to access network resources and configure parameters such as flow control, link mode, storm control, MAC limit, and so on, on the switch ports. If you include firewall filters for egress and ingress traffic in the port profile, you can permit or deny access to network resources granularly based on source and destination IP addresses, MAC addresses, ports, and protocols in the packets.

Tasks You Can Perform

You can perform the following tasks from this page:

Field Descriptions

Table 225 describes the fields on the Port Profiles page.

Table 225: Fields on the Port Profiles Page

Field

Description

Profile Name

Name of the port profile.

Description

Description of the port profile.

Port Mode

Operating mode defined in the profile for a port—Trunk, Access.

Port Authentication Profile

Authentication profile assigned on the port.

Firewall Filter (Ingress)

Firewall filter assigned for the ingress traffic.

Firewall Filter (Egress)

Firewall filter assigned for the egress traffic.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit