Help Center User GuideGetting StartedFAQ
 
X
User Guide
Getting Started
FAQ
Contents  

About the SD-WAN Events Page

To access this page, click Monitor > Link Switch Events in the Customer Portal.

You can use the SD-WAN Events page to view information about SD-WAN events. An SD-WAN event is triggered when the SLA requirements for a site are not met on its network-designated WAN link and the site switches WAN links to meet the SLA requirements.

Tasks You Can Perform

You can perform the following tasks from this page:

Field Descriptions

Table 35 describes the fields on the SD-WAN Events page.

Table 35: Fields on the SD-WAN Events Page

Field

Description

Time Range

View a graphical representation of SD-WAN events against a defined time range. The x-axis represents the defined time and the y-axis represents SD-WAN events.

Use the slider to decrease or increase the time range within which you want to view SD-WAN events. You can also choose from pre-defined time ranges such as 2h, 4h, 8h, 16h, 24h, or Custom. For custom time, you must enter from and to dates in MM/DD/YYYY format and the time in HH:MM:SS format. By default, Previous 1 day is selected.

SLA Violation Time

Date and time at which the SLA violation occurred.

Link Switch Time

Date and time at which the link was switched.

Site

Name of the site for which the link was switched.

Connected To

Displays the name of the destination spoke or hub site to which the traffic is being sent.

SLA Profile

Name of the SLA-based steering profile associated with the site.

Reason

Indicates the reason for the link switch.

Mouse over the reason to view details of the SLA metrics violated.

Apps

Name of the applications for which the SLA violation occurred.

Department

Name of the department for which the SLA violation occurred.

Source Tunnel

Overlay tunnel of the device from which the link switch took place.

Destination Tunnel

Overlay tunnel of the device to which the link switch took place.

Duration (Sec)

Duration (in seconds) for which the SLA requirement for a site was not met before the site switched WAN links.

A duration of 0 indicates that the site switched WAN links before it failed to meet the SLA requirements, and the SLA requirements were met immediately on the new WAN link with no loss in meeting SLA requirements.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit