Help Center User GuideGetting StartedFAQ
 
X
User Guide
Getting Started
FAQ
Contents  

Edit or Delete MAC Address Endpoint

You can edit or delete MAC Addresses from the MAC Addresses page.

Edit MAC Address

Note You cannot modify the name of the MAC address.

Procedure

To modify the parameters configured for a MAC address:

  1. Select Configuration > Shared Objects > MAC.

    The MAC Address page appears.

  2. Select the MAC address that you want to edit, and then click on the edit icon (pencil), on the top right corner of the table.

    The Edit MAC Endpoint page appears, showing the same options as those displayed when you create a new MAC address.

  3. Modify the description for the MAC Endpoint.
  4. Click OK to save the changes. If you want to discard your changes, click Cancel instead.

The modified MAC endpoint description appears on the MAC Addresses page.

Delete MAC Address

Procedure

To delete a MAC address:

  1. Select Configuration > Shared Objects > MAC.

    The MAC Addresses page appears.

  2. Select the MAC address that you want to delete and then click the delete icon.

    An alert message appears to verify that you want to delete the selected MAC address.

  3. Click Yes to delete the selected MAC address. If you do not want to delete, click No instead.

The deleted MAC address is removed from the MAC Addresses page.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit