Help Center User GuideGetting StartedFAQ
 
X
User Guide
Getting Started
FAQ
Contents  

Add a Protocol Endpoint

Before You Begin

Use the Protocols page to add a new protocol, which you can specify as a source endpoint or destination endpoint in firewall filter terms.

Procedure

To add a protocol:

  1. Select Configuration > Shared Objects > Protocols.

    The Protocols page appears.

  2. Click the add icon (+) to add a new protocol.

    The Add Protocol Endpoint page appears.

  3. Complete the configuration according to the guidelines provided in Table 298.

    Note Fields marked with * are mandatory.

  4. Click OK to save the changes. If you want to discard your changes, click Cancel instead.

    The new protocol is created. You are returned to the Protocols page where a confirmation message is displayed.

Table 298 provides guidelines on using the fields on the Add Protocol Endpoint page.

Table 298: Fields on the Add Protocol Endpoint Page

Field

Description

Protocol Number

Enter a valid protocol number.

Range is 0-255.

Example: egp (8), esp (50), gre (47), icmp (1), igmp (2), ipip (4), ospf (89), pim (103), rsvp (46), tcp (6), udp (17)

Description

Enter a description for the protocol.

WHAT'S NEXT

After adding protocol, you can specify the protocol as source endpoint or destination endpoint in firewall filter terms, see Add Terms to Firewall Filters.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit