Help Center User GuideGetting StartedFAQ
User Guide
Getting Started

Resetting the Password

Before You Begin

 If you have forgotten your password, you can reset the password from the Contrail Service Orchestration (CSO) login page.

Note If you have entered an incorrect password, your account will be locked after five consecutive unsuccessful login attempts.


To reset the password:

  1. On the login page, enter the username , and then press Enter.
  2. Click the Forgot Password link.

    The Forgot Password page appears, with a message that an e-mail notification with a verification code is sent to your e-mail address.

    Note The Forgot Password link appears only after you specify the username.

  3. In Verification Code, specify the verification code that you have received through an e-mail.

    Note The verification code expires after a time duration of 15 minutes.

  4. Click OK.

    The Reset Password page appears.

  5. Change your password following the guidelines provided in Table 8.
  6. Click OK.

Your password is reset.

Table 8: Fields on the Reset Password Page




Enter your username.

New Password

Enter your new password.

The login password that you set must be between 6 and 21 characters long, and it must include at least one lowercase letter, one uppercase letter, one special character, and one number.

Note: The password strength indicator displays the efficiency of the password that you enter. You cannot proceed to the next step if the password strength indicator shows that the password is weak.

Confirm Password

Reenter the password for confirmation.

You can select Show Password to view the password.

Related Documentation

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      

Additional Comments

800 characters remaining

May we contact you if necessary?


Need product assistance? Contact Juniper Support