Assign Configuration Templates to Device Templates
In Administration Portal, users with the SP (Service Provider) Administrator role (on-premises installation only) or OpCo (Operating Company) Administrator role can assign a configuration template to one or more device templates. Associating a configuration template with a device template enables you to deploy additional configuration on the device during ZTP and after the device is activated.
In CSO releases before Release 5.1.0, configuration templates are called stage-2 configuration templates.
To assign a configuration template to one or more device templates:
- Select Resources > Templates > Configuration Templates.
The Configuration Templates page appears.
- Select the configuration template that you want to assign
and select More > Assign to Device Template.
The Assign Configuration Template to Device Templates page appears.
- Complete the configuration according to the guidelines
provided in Table 1
Fields marked with an asterisk (*) are mandatory.
- Click OK.
You are returned to the Configuration Templates page and a popup appears indicating whether the assignment is successful or has failed. If the assignment failed, you can retry the assignment or contact Juniper Networks support.
If the assignment is successful, you can navigate to the Device-Name page (where the configuration parameters are displayed) and enter values for the configuration and deploy the configuration on the device.
Table 1: Assign Configuration Template to Device Template Settings
Displays the name of the configuration template that you are assigning; you cannot modify this field.
Enter the name that you want displayed on the Device-Name page.
For NFX250 devices, select the component name to which the configuration should be deployed. The components that are currently supported are:
Specify whether the configuration should be deployed automatically on the device during the zero touch provisioning (ZTP) process. The options are:
Note: This field is enabled only if you select Auto Deploy as No.
Select whether the configuration template should be enabled for:
This field appears only if you specified that the configuration template should be available for specific tenants.
Select one or more tenants and click the greater-than icon (>) to move the selected tenant or tenants from the Available column to the Selected column. You can use the search icon on the top right of each column to search for tenant names.
Click Next to continue.
Select Device Templates
The list of device templates to which you can assign the configuration template are displayed in a grid along with some information about the template. CSO displays only those device templates whose device family matches the device family of the configuration template.
Select one or more device templates to which you want to assign the configuration template.