Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Software Support

 

Software Downloads

Table 1 displays the supported versions and download links for software components associated with CSO Release 5.1.2.​

Note
  • Before you onboard devices, ensure that the device is running the software version that is recommended in this release notes.

Table 1: Software Components Associated with CSO Release 5.1.2

Product

Supported Version

Download Link

Juniper Identity Management Service (JIMS)

1.1.5R1

Pre-bundled with CSO.

EX Series switches

Junos OS Release 18.4R2

Junos OS Release 18.4R3

Junos OS Release 18.4R2

Junos OS Release 18.4R3

NFX150 CPE device

Junos OS Release 19.3R2-S3

NFX250 CPE device

Junos OS Release 18.4R3-S3

Junos OS Release 19.3R2-S3 for vSRX

SRX Series CPE devices

Junos OS Release 19.3R2-S3

SRX300, SRX320, SRX340, SRX345, and SRX550 High Memory Services Gateway (SRX550M) (as spoke devices):

SRX Series Next-Generation Firewall devices

Junos OS Release 19.3R2-S3

SRX300, SRX320, SRX340, SRX345, and SRX550:

SRX Series Provider Hub device

Junos OS Release 19.3R2-S3

SRX1500

SRX4100, SRX4200:

SRX Series Enterprise Hub devices

Junos OS Release 19.3R2-S3

vSRX for SD-WAN devices

Junos OS Release 19.3R2-S3

For hub devices and spoke devices:

vSRX for next-generation firewall devices

Junos OS Release 19.3R2-S3

Note

For limitations and caveats related to devices, see Device Management in the Known Behavior section.

Software Installation Requirements for NFX Series Network Services Platform

When you set up a distributed deployment with an NFX150 or an NFX250 device, you must use Administration Portal or the CSO API to:

  1. Upload the software image to CSO.Note

    Only an SP administrator can upload the software image to CSO. If you are an OpCo administrator or a tenant administrator and if you need to upload the required software image, contact Juniper Networks Technical Assistance Center (JTAC).

  2. Specify this image as the boot image when you configure activation data.

For more information on NFX series documentation, see https://www.juniper.net/documentation/product/en_US/nfx150 and https://www.juniper.net/documentation/product/en_US/nfx250 .

Installation and Upgrade Instructions

Note

You can upgrade to CSO Release 5.1.2 only from CSO Release 4.1.2. If your installed version of CSO is not Release 4.1.2, then you must perform a fresh installation of CSO 5.1.2.

For more information on installation and upgrade instructions, see the Installation and Upgrade Guide.