To configure the performance goals of a network service:
The New Goal window is displayed.
Best Practice Adding one or more goals to the request enables you to track performance of those parameters when you design a network service for the request. Although adding goals is not mandatory, we recommend that you do so.
Table 19: Fields on the Performance Goal Page
Field | Description |
|---|---|
Session | |
Goal Value | Specify the target value for the goal. When you design a network service, the goal value is used by the Network Service Designer to evaluate how your design meets the goal. There is no upper limit. As a guideline, typical achievable values for a firewall are as follows:
|
Acceptable Value | Specify a value that is lower than the target and acceptable for the network service. When you design a network service, the acceptable value is used by the Network Service Designer to evaluate how your design meets the goal. Example:
|
Must Value | Specify the minimum value for the goal. The minimum value should be lower than the acceptable value. When you design a network service, the must value is used by the Network Service Designer to evaluate how your design meets the goal. Example:
|
Based on | View the method that is used by the Network Service Designer to evaluate how your design meets the goal. You cannot edit this field. Example:
|
Unit | Specify the measurement unit of the goal. Example:
|